Introduction to the sine ratio.
Consider this right angled
Side ‘p’ is opposite to angle ‘P’, and side ‘q’ is opposite to angle ‘Q’.
For an angle less than 90º in a right angled triangle, the following ratio:
For example, the sine ratio of angle ‘P’ above can be found as follows:
Consider the triangle below:
The hypotenuse in a right triangle is always larger than the opposite side, so for angles greater than zero but less than 90º the sine ratio will be less than 1. For angles outside of these limits, the sine ratio can have values from -1 to 1.
Maths Helper Plus can calculate sine ratios if the opposite side and hypotenuse lengths of a right triangle are given. It will show the calculations and display a labelled diagram. The diagram is drawn in the same orientation as the triangle in the example above, with angles labelled 'P' and 'Q'.
Step 2 Display the parameters box
Press the F5 key to display the parameters box:
You enter the given information into these edit boxes as follows:
edit box 'A' = the opposite side
edit box 'B' = the hypotenuse
edit box 'C' = the scale factor for the triangle side lengths. ( Leave set to 1)
If edit box 'X' = 1, then the sine ratio is calculated for angle ‘P’, the angle at the lower left of the diagram, and the opposite side A is vertical.
If edit box 'X' = 2, then the sine ratio is calculated for angle ‘Q’, the angle at the top of the diagram, and the opposite side A is horizontal.
Click the 'Update' button to refresh the diagram and calculations.
To display the calculations and diagram for the examples in the 'Theory' section above, enter these settings:
Step 3 Adjust the size of the diagram
If the triangle diagram is too big to display properly on your computer screen, briefly press the F10 key to reduce its size. To make the diagram bigger, hold down a Ctrl key while you press F10.